HomeProductsPricingContact Us
Hangers 1 & 2Hanger 3Hanger 4Leak Converter Kit

Leak Diverter is supported by
Hanger 3 made of white plastic
to match ceiling.

Leaks below grid ceilings:

  • Attach Poly Hanger 3 to grid at perimeter of leak area.
  • Cut poly sheeting to size. At center of poly, make a pilot hole through the poly using the tool provided in the kit. Push the special nylon drain fitting through the pilot hole and secure with the nylon nut.
  • Attach the poly sheeting to the Poly Hangers on the grid.
  • Attach the vinyl drain tubing to the drain fitting and run the tubing to a remote location.
Leaks above ceilings:
  • Follow same steps as listed above except use Poly Hanger 4 which will attach to joists, pipes and other items typically found above ceilings.

Poly Hanger type 3 (20 EA)
Poly Hanger type 4 (8 EA)
Poly Sheeting (25' x 10')
Drain Fitting (3 EA)
Vinyl Drain Tubing (50')
Pails - 5 gal (3 EA)
Tie Wire (8')
Safety-cut Blade
Pilot Hole Tool
To attach poly sheeting to ceiling grid
To attach poly sheeting to joists, pipes, etc
To catch and divert roof leaks
To attach vinyl drain tubing to poly sheeting
To drain water
To collect water
To suspend vinyl drain tubing
To cut poly sheeting
To make hole in poly for drain fitting

Packaged in a box 12� x 12� x 24�, weight 20lbs.


DP Engineering, Inc. | PO BOX 4055 | Madison CT 06443 | 203-421-7965 |